The RJ1 is a general purpose connector.

Suitable for many applications such as joining staircase handrail, scrolls, and stringers. The speed and ease of use are the main advantages with the RJ1. Using the tools you have on hand you can tighten or loosen the RJ1. A 4mm Allan Key, Phillips Head or Flat Head screwdriver all fit effortlessly! Drilling is simple using a 22mm spade bit for the housing and a 10mm bit for the through, or connecting hole. This can be done in the factory or on site. If the holes are pre-drilled in the factory the joint can be made in a number of seconds!

The RJ2 is the specialist bench or work top connector.

The ease of use unrivalled, because the installer never has to touch the connector with his/her hands, the RJ2 is pre-installed at fabrication and it holds itself securely under the surface until the time comes when the installer is ready to assemble the tops. By simply placing a driver drill into the specially designed recess the RJ2 head finds its way down the trench in the top and locates itself in the 22mm recess at the opposing side of the join or joint. The join or joint is then tightened by simply changing direction of the drill to bring the join together.

The Rapidjoint connector can be adjusted at 90 degrees to the axis of the join, thanks to its bevel gear arrangement.